Packaging Testing Machine

Packaging clamping test machine Packaging clamping test machine

Packaging clamping test machine RS-8418

Packaging clamping test machine RS-8418 Features：
1. Manual operating arm analogs forklift’s actual operation action to control clamping, stretching, hoisting and lowering action, control panel may realize continuous and automatic action and single step repetition;
2. Both vertical and horizontal offsets between clamp plate and test piece can be set, repeatedly continuous and periodical clamp test can be realized according to setup parameters, test period can be adjusted from 1 to 99 at will;
3. Clamp duration can be set with control program from 0 to 600s at will;
4. Control panel and clamp arm are required to be installed separately for the equipment and the distance from control panel to clamp arm shall be more than 2 meters;
5. Baseplate shall parallel to assembling floor so as to install the test piece.

GET A QUOTE

Products Show

 

Packaging clamping test machine

Product Application

 

This test equipment is mainly applicable to the holding by which the package passes through the clutch of the forklift during transportation and is evaluated by a simulation test on the protection ability of the product packaging inside the package.

Technical Parameters

 

model RS-8418
Maximum specimen weight: 500Kg or negotiate
Clamping pressure: 400-3000 lbs adjustable
Force Corrector: Force sensor and digital display to calibrate the clamping force
Explanation: Kg, KN, Lb can be switched
Force accuracy: National standard 1.6
Clamping panel size: 1200*1500mm or negotiated, thickness not less than 25mm
Splint requirements: The two clamping plates are guaranteed to be flat and not deformed under the maximum pressure working state. The two clamping plates are parallel to each other and perpendicular to the floor.
Clamping space: W600-2100xD1200xH1400mm or negotiate
Base plate size: W2200xD2000xH20mm
Clamping speed: 10~300mm/min adjustable
Lifting height: 0~1000mm adjustable
safety devices: Защита от перегрузки, защита от перегрузки, защита от
перегрузки, защита от перегрузки, защита от пределов,
Overload protection, overvoltage protection, limit protection, instantaneous crush protection, sudden power failure protection
control: The controller uses a touch screen human-machine interface and PLC programming control,
 which is easy to operate and has stable performance.
Drive mode: Hydraulic drive (electrical drive optional)
power supply: AC380V/50Hz3KW
Overall size: W2200xD2000xH2050mm
Control box size: W750xD800xH1000mm
weight: About 3200kg

Manufacture Ability

 

Service Cases

 

Inquiry